Adopting the OEE Method in the Air Separation Plant (ASP) Machine to Measure Its Productivity at PT XYZ
DOI:
https://doi.org/10.55606/isaintek.v7i2.241Keywords:
Machine Performance, OEE, Preventive Maintenance, ProductivityAbstract
PT XYZ is a company that produces various gases in the form of Oxygen, Nitrogen, and Argon in gas and liquid form. In the production process, the machine runs 24 hours non-stop and will stop production when maintenance is employed once a year. The Air Separation Plant (ASP) machine performance measurements are needed to determine the effectiveness of its production. The reseacrh aims to analyze the factors that affect machine productivity. The method used is quantitative, using the Overall Equipment Effectiveness (OEE) approach. In addition, this study uses interviews to determine the factors that affect engine performance. The results show that the OEE value of the machine is 75%, which is still below the international standard OEE value of 85%. Therefore, it is necessary to optimize engine performance. Based on the analysis using a fishbone diagram, there are five influencing factors: human factors, machines, work methods, environment, and materials. Based on these five factors, the engine factor most influences the low value of engine performance. The predictive maintenance calculations are conducted, especially on expender and cold box machines, every 95 days of machine should use with work efficiency of around 40 hours.
References
Afiva, W. H., Tatas, F., Atmaji, D., & Alhilman, J. (2018). Usulan Interval Preventive Maintenance dan Estimasi Biaya Pemeliharaan Menggunakan Metode Reliability Centered Maintenance dan FMECA. https://doi.org/10.23917/jiti.v18i2.8551
Ariyah, H. (2022). Penerapan Metode Overall Equipment Effectiveness ( OEE ) Dalam Peningkatan Efisiensi Mesin Batching Plant ( Studi Kasus : PT . Lutvindo Wijaya Perkasa ). 1(Ii), 70–77.
Azwina, R., Wardani, P., Sitanggang, F., & Silalahi, P. R. (2023). Strategi Industri Manufaktur Dalam Meningkatkan Percepatan Pertumbuhan Ekonomi di Indonesia. Jurnal Manajemn, Bisnis Dan Akuntansi, 2(1), 44–55.
Cheah, C. K., Prakash, J., Ong, S., Teknik, F., Tunku, U., & Rahman, A. (2020). Kerangka kerja OEE terintegrasi untuk peningkatan produktivitas terstruktur dalam fasilitas manufaktur semikonduktor 1081. 69(5). https://doi.org/10.1108/IJPPM-04
Coccia, M. (2020). Fishbone diagram for technological analysis and foresight. IInt. J. Foresight and Innovation Policy, 14(2–4), 225–247. https://doi.org/10.1504/ijfip.2020.111221
Damayanti, M. L. (2020). Teori produksi. In Fakultas Sains dan Teknologi, Universitas Muhammadiyah Sidoarjo. http://eprints.umsida.ac.id/6985/
Dwi Atmaji, F., & Alhilman, J. (2018). A Framework of Wireless Maintenance System Monitoring: A Case Study of an Automatic Filling Machine at SB Company. https://doi.org/10.1109/ICoICT.2018.8528722
Elisatriana, N., & Amrina, U. (2019). Menghitung efektifitas mesin. XIII(2), 212–222.
Farmasetika. (2021). Ishikawa Diagram dan Failure Mode Effect Analysis (FMEA) sebagai Metode yang sering digunakan dalam Manajemen Risiko Mutu di Industri. 6(1), 1–9.
Huang, J., Chang, Q., & Arinez, J. (2020). Deep reinforcement learning based preventive maintenance policy for serial production lines. Expert Systems with Applications, 160, 113701. https://doi.org/10.1016/j.eswa.2020.113701
Huang, S. (2017). Metrik efektivitas throughput keseluruhan ( OTE ) untuk pemantauan kinerja tingkat pabrik dan deteksi kemacetan. https://doi.org/10.1080/00207540600786731
Karima, H. Q., & Romadlon, F. (2021). Optimizing the Preventive Maintenance Scheduling Based on Dynamic Deterministic Demand in The Cement Manufacturing. Jurnal Ilmiah Teknik Industri, 20(1), 109–118. https://doi.org/10.23917/jiti.v20i1.13894
Karima, H. Q., Saputra, M. A., & Romadlon, F. (2022). Analisis Kapasitas Produksi dan Pemenuhan Permintaan dengan Model Sistem Dinamis pada Industri Semen. Unistek, 9(1), 11–18. https://doi.org/10.33592/unistek.v9i1.1919
Khalif, B. B., Puspita N, C., Alexander, S., & Salomon, L. L. (2020). Analisis Kualitas Produk Drum Dan Metal Packaging (Studi Kasus: Plant 1 Pt Guna Senaputra Sejahtera). Jurnal Ilmiah Teknik Industri, 7(3), 149–159. https://doi.org/10.24912/jitiuntar.v7i3.6998
Kurnia, H., Jaqin, C., & Hardi Purba, H. (2022). the Pdca Approach With Oee Methods for Increasing Productivity in the Garment Industry. Jurnal Ilmiah Teknik Industri, 10(1), 57–68. https://journal.untar.ac.id/index.php/industri/article/view/15430
Nasution, M., Bakhori, A., & Novarika, W. (2021). Manfaat Perlunya Manajemen Perawatan Untuk Bengkel Maupun Industri. Buletin Utama Teknik, 16, No. 3, 248–252.
Raman, R. S., & Basavaraj, Y. (2020). Quality Improvement of Capacitors through Fishbone and Pareto Techniques. July. https://doi.org/10.3940/ijrte.B2444.078219
Samator Gas Indonesia. (2023). Gas Products. PT Samator Indo Gas Tbk. https://samatorgas.com/en/products-services
Siregar, N., & Munthe, S. (2019). Analisa Perawatan Mesin Digester dengan Metode Reliabity Centered Maintenance pada PTPN II Pagar Merbau. Jime (Journal of Industrial and Manufacture Engineering), 3(2), 89.
Tsarouhas, P. (2019). Improving operation of the croissant production line through overall equipment effectiveness (OEE): A case study. International Journal of Productivity and Performance Management, 68(1), 88–108. https://doi.org/10.1108/IJPPM-02-2018-0060
