Evaluasi Implementasi Otomasi Proses Dumping Material Panas dan Implikasinya terhadap Strategi B2B pada Industri Kimia
DOI:
https://doi.org/10.55606/isaintek.v9i1.424Keywords:
hot material dumping, process consistency, automation, B2B strategy, chemical industryAbstract
Hot material dumping in the chemical industry is an important process stage that affects occupational safety, process stability, and product quality reliability. In manual processes, dumping activities may cause variation because they are influenced by operator condition, pouring angle, work speed, and exposure to hot materials. This study aims to analyze the consistency of the hot material dumping process and formulate a B2B strategy based on process reliability. The research method uses a descriptive-quantitative case study approach with data from 20 batches, analyzed through three indicators: dumping time, pouring flow stability, and material temperature change or ΔT. The data were primary data obtained directly through field observation, production-process documentation, and recording of process parameters; journal literature was used only as the theoretical and interpretive basis. The results show that the automated process provides more consistent performance than the manual process. The average dumping time decreased from 49.14 seconds to 30.18 seconds, the coefficient of variation for dumping time decreased from 12.44% to 1.36%, the pouring flow stability score increased from 2.55 to 4.70, and the average material ΔT decreased from 15.26°C to 8.16°C. These findings indicate that automation can improve process regularity, reduce variation between batches, and maintain material conditions in a more controlled manner. This process consistency can serve as the basis for a B2B strategy based on process reliability, emphasizing process reliability, production safety, quality consistency, and data-based evidence as key values in building industrial customer trust.
References
Arana-Landín, G., Laskurain-Iturbe, I., Iturrate, M., & Landeta-Manzano, B. (2023). Assessing the influence of Industry 4.0 technologies on occupational health and safety. Heliyon, 9(3), e13720. https://doi.org/10.1016/j.heliyon.2023.e13720
Faccio, M., Granata, I., Menini, A., Milanese, M., Rossato, C., Bottin, M., Minto, R., Pluchino, P., Gamberini, L., Boschetti, G., & Rosati, G. (2023). Human factors in cobot era: A review of modern production systems features. Journal of Intelligent Manufacturing, 34(1), 85–106. https://doi.org/10.1007/s10845-022-01953-w
Giallanza, A., La Scalia, G., Micale, R., & La Fata, C. M. (2024). Occupational health and safety issues in human-robot collaboration: State of the art and open challenges. Safety Science, 169, 106313. https://doi.org/10.1016/j.ssci.2023.106313
Hanna, A., Larsson, S., Götvall, P. L., & Bengtsson, K. (2022). Deliberative safety for industrial intelligent human-robot collaboration: Regulatory challenges and solutions for taking the next step towards Industry 4.0. Robotics and Computer-Integrated Manufacturing, 78, 102386. https://doi.org/10.1016/j.rcim.2022.102386
Huck, T., Münch, N., Hornung, L., Ledermann, C., & Wurll, C. (2021). Risk assessment tools for industrial human-robot collaboration: Novel approaches and practical needs. Safety Science, 141, 105288. https://doi.org/10.1016/j.ssci.2021.105288
Javaid, M., Haleem, A., Singh, R. P., Rab, S., & Suman, R. (2022). Significant applications of cobots in the field of manufacturing. Cognitive Robotics, 2, 222–233. https://doi.org/10.1016/j.cogr.2022.10.001
Jocelyn, S., Ledoux, E., Marrero, I. A., Burlet-Vienney, D., Chinniah, Y., Bonev, I., Mosbah, A., & Berger, I. (2023). Classification of collaborative applications and key variability factors to support the first step of risk assessment when integrating cobots. Safety Science, 166, 106219. https://doi.org/10.1016/j.ssci.2023.106219
Karagiannis, P., Kousi, N., Michalos, G., Dimoulas, K., Mparis, K., Dimosthenopoulos, D., Tokçalar, O., Guasch, T., Gerio, G. P., & Makris, S. (2022). Adaptive speed and separation monitoring based on switching of safety zones for effective human robot collaboration. Robotics and Computer-Integrated Manufacturing, 77, 102361. https://doi.org/10.1016/j.rcim.2022.102361
Kheirabadi, S., Keivanpour, M., Chinniah, Y., & Frayret, J. M. (2023). Human-robot collaboration in assembly line balancing problems: Review and research gaps. Computers & Industrial Engineering, 186, 109737. https://doi.org/10.1016/j.cie.2023.109737
Kim, W., Peternel, L., Lorenzini, M., Babič, J., & Ajoudani, A. (2021). A human-robot collaboration framework for improving ergonomics during dexterous operation of power tools. Robotics and Computer-Integrated Manufacturing, 68, 102084. https://doi.org/10.1016/j.rcim.2020.102084
Kowalkowski, C., Wirtz, J., & Ehret, M. (2024). Digital service innovation in B2B markets. Journal of Service Management, 35(2), 280–305. https://doi.org/10.1108/JOSM-12-2022-0403
Krimi, I., Bahou, Z., & Al-Aomar, R. (2024). Resilient and sustainable B2B chemical supply chain capacity expansions: A systematic literature review. Journal of Business & Industrial Marketing, 39(13), 175–199. https://doi.org/10.1108/JBIM-01-2024-0017
Li, W., Hu, Y., Zhou, Y., & Pham, D. T. (2024). Safe human-robot collaboration for industrial settings: A survey. Journal of Intelligent Manufacturing, 35, 2235–2261. https://doi.org/10.1007/s10845-023-02159-4
Othman, U., & Yang, E. (2023). Human-robot collaborations in smart manufacturing environments: Review and outlook. Sensors, 23(12), 5663. https://doi.org/10.3390/s23125663
Rahdiana, N., Suhardi, B., Damayanti, R. W., Susanto, N., & Rohani, J. M. (2024). Towards safer workplace: A survey-based study on developing a safety climate model for the Indonesian paper industry. Jurnal Optimasi Sistem Industri, 23(2), 130–148. https://doi.org/10.25077/josi.v23.n2.p130-148.2024
Saputra, A. A., Wahyudin, & Nugraha, A. E. (2021). Evaluasi aktivitas manual material handling dengan menggunakan metode biomekanika kerja pada pengangkatan thiner di bagian warehouse. Jurnal Sistem Teknik Industri, 23(2), 233–244. https://doi.org/10.32734/jsti.v23i2.6273
Sulistyo, A. B., Karningsih, P. D., & Alvandi, S. (2024). Developing an industry-specific Lean 4.0 readiness assessment tool: A case for the chemical sector. Jurnal Optimasi Sistem Industri, 23(2), 283–298. https://doi.org/10.25077/josi.v23.n2.p283-298.2024
Uddin, M. B., & Jayaram, J. (2025). Impact of buyer and competition pressure on supplier manufacturing automation implementation and workforce upskilling: The moderating role of top management support. The International Journal of Logistics Management, 36(4), 1063–1093. https://doi.org/10.1108/IJLM-05-2024-0332
Urbaniak, M., Zimon, D., & Madzík, P. (2024). Expectations of manufacturing companies towards suppliers in terms of implementing improvement activities. Central European Management Journal, 32(4), 618–637. https://doi.org/10.1108/CEMJ-07-2023-0286
Xu, L., Zou, Y., Lu, Y., & Chang-Richards, A. (2025). Automation in manufacturing and assembly of industrialised construction. Automation in Construction, 170, 105945. https://doi.org/10.1016/j.autcon.2024.105945
